MASS AIR FLOW METER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY LH


    1. Disconnect the mass air flow meter sub-assembly connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly LH.

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY RH


    1. Disconnect the mass air flow meter sub-assembly connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly RH.

  4. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)


    1. A000UYC

      Remove the 2 screws and mass air flow meter sub-assembly.

  5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)


    1. A000XWE

      Remove the 2 screws and mass air flow meter sub-assembly.