ECM INSTALLATION

PROCEDURE


  1. INSTALL ECM


    1. Install the 2 ECM brackets with the 4 screws.

    2. A000X2C

      Install the ECM with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the 6 ECM connectors.

  2. CONNECT NO. 2 CONNECTOR HOLDER


    1. A000V4JE05
      *1 Connector Holder

      Attach the 2 claws to connect the No. 2 connector holder.

    2. Connect the 2 engine wire connectors.

  3. INSTALL HYBRID VEHICLE CONTROL ECU


    1. A000ZSJ

      Install the hybrid vehicle control ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 4 hybrid vehicle control ECU connectors.

  4. INSTALL ENGINE ROOM ECU COVER

    A000TIH

    1. Install the engine room ECU cover with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  5. INSTALL ENGINE ROOM SIDE COVER LH

    Click here

  6. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  9. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  10. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here