CAMSHAFT TIMING CONTROL MOTOR REMOVAL

PROCEDURE


  1. REMOVE INTAKE AIR CONNECTOR PIPE

    Click here

  2. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY RH

    A000X7CE04
    *1 Bracket

    1. Disconnect the 2 cam timing control with EDU motor assembly RH connectors.

    2. Remove the bolt and engine wire bracket.

    3. A000WG0

      Remove the 3 bolts and cam timing control with EDU motor assembly RH.

      Note

      Do not allow foreign matter to contact the oil seal face of the cam timing control with EDU motor assembly RH (connecting surface with timing chain cover).

    4. Remove the O-ring from the timing chain cover.

  3. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY LH

    A000W7Q

    1. Disconnect the 2 cam timing control with EDU motor assembly LH connectors and wire harness clamp.

    2. A000XGW

      Remove the 3 bolts and cam timing control with EDU motor assembly LH.

      Note

      Do not allow foreign matter to contact the oil seal face of the cam timing control with EDU motor assembly LH (connecting surface with timing chain cover).

    3. Remove the O-ring from the timing chain cover.