VVT SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE AIR CLEANER ASSEMBLY LH

    Click here

  5. REMOVE AIR CLEANER ASSEMBLY RH

    Click here

  6. REMOVE VVT SENSOR


    1. A000W9TE03
      *1 for Bank 2:
      *2 for Bank 1:

      Disconnect the 4 VVT sensor connectors.

    2. Remove the 4 bolts and 4 VVT sensors.