HEATED OXYGEN SENSOR INSPECTION

PROCEDURE

1. INSPECT HEATED OXYGEN SENSOR

   

   *a	Component without harness connected:
   *b	(Heated Oxygen Sensor)
   *c	for Bank 1:
   *d	for Bank 2:

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 (HT1B) - 2 (+B) 1 (HT2B) - 2 (+B) 20°C (68°F) 11 to 16 Ω

      If the result is not as specified, replace the heated oxygen sensor.