BRAKE GENERAL MAINTENANCE

PROCEDURE

1. INSPECT BRAKE PEDAL

   Type	See procedures
   for LHD	Click here
   for RHD	Click here

2. INSPECT PARKING BRAKE

   Click here

3. INSPECT BRAKE LININGS AND DRUMS

   
   

   1. Check the brake linings and drums.

   2. Inspect the parking brake linings Click here.

4. INSPECT BRAKE PADS AND DISCS

   Type	See procedures
   Front brake (for 6-Pot Caliper)	Click here
   Front brake (except 6-Pot Caliper)	Click here
   Rear brake	Click here

5. INSPECT BRAKE FLUID

   Click here

6. REPLACE BRAKE FLUID

   
   

   1. Replace the brake fluid Click here.

7. INSPECT BRAKE PIPES AND HOSES

   Tech Tips

   Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.

   
   

   1. 

      Using a mirror, check the entire circumference and length of the brake lines and hoses for:

      
      

      • Damage

      • Wear

      • Deformation

      • Cracks

      • Corrosion

      • Leaks

      • Bends

      • Twists

   2. Check all the clamps for tightness and the connections for leakage.

   3. Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.

   4. Check that the lines are installed properly and pass through the center of the grommets.