SUSPENSION CONTROL SERVICE DATA

Height control compressor
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 10 to 14 Ω
No. 1 height control valve sub-assembly
Tester Connection Condition Specified Condition
1 (RH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
3 (LH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
No. 2 height control valve sub-assembly
Tester Connection Condition Specified Condition
1 (RH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
3 (LH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
Front height control sensor sub-assembly LH
Tester Connection Condition Specified Condition
2 - 1 Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V
Rear height control sensor sub-assembly LH
Tester Connection Condition Specified Condition
2 - 1 Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V
Suspension control relay
Tester Connection Condition Specified Condition
3 - 5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
When battery voltage is applied to terminals 1 and 2 Below 1 Ω
Acceleration sensor assembly (Front acceleration sensor)
Tester Connection Condition Specified Condition
1 (SGFL) - 2 (SGG) Sensor is stationary Approx. 2.25 V
Sensor is tilted Change between approx. 0.9 to 2.3 V
Acceleration sensor assembly (Rear acceleration sensor)
Tester Connection Condition Specified Condition
1 (SGRR) - 2 (SGND) Sensor is stationary Approx. 2.25 V
Sensor is tilted Change between approx. 0.9 to 2.3 V
Absorber control actuator
Tester Connection Condition Specified Condition
1 (B+) - 3 (GND) Always 12.0 to 12.8 Ω
2 (A+) - 3 (GND)
4 (B-) - 3 (GND)
5 (A-) - 3 (GND)