CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
PROCEDURE
INSTALL REAR DOOR INSIDE LOCKING LH CABLE ASSEMBLY
INSTALL REAR DOOR LOCK REMOTE CONTROL LH CABLE ASSEMBLY
INSTALL REAR DOOR LOCK ASSEMBLY LH
Apply adhesive to the threads of the 5 screws.
Install the rear door lock assembly LH.
Using a T30 'TORX' wrench, install the door lock with the 3 screws labeled A and 2 screws labeled B.
Attach the 2 clamps and connect the 2 connectors.
INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
INSTALL REAR DOOR QUARTER WINDOW GLASS LH
INSTALL REAR DOOR GLASS RUN LH
INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
INSTALL REAR DOOR DIVISION BAR BRACKET LOWER LH
INSTALL REAR DOOR SERVICE HOLE COVER LH
INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH
INSTALL REAR SIDE TRIM BOARD COVER LH (w/ Rear Door Sunshade)
INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)
INSTALL REAR LH CURTAIN SUB-ASSEMBLY (w/ Rear Door Sunshade)
INSTALL REAR DOOR NO. 2 FRAME GARNISH LH
INSTALL REAR DOOR FRAME GARNISH LH
INSTALL REAR DOOR TRIM COVER LH
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
w/o Rear Door Sunshade:
w/ Rear Door Sunshade:
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)