FRONT DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH

   Click here

2. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

   Click here

3. INSTALL FRONT DOOR LOCK ASSEMBLY LH

   
   

   1. 

      Apply adhesive to the threads of the 5 screws.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

   2. Install the front door lock assembly LH.

   3. Using a T30 ''TORX'' wrench, install the 3 screws labeled A and the 2 screws labeled B.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   4. Connect the 2 connectors.

4. INSTALL FRONT DOOR LOWER FRAME GARNISH PAD LH

   Click here

5. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH

   Click here

6. INSTALL FRONT DOOR FRAME SUB-ASSEMBLY REAR LOWER LH

   Click here

7. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

   Click here

8. INSTALL FRONT DOOR SERVICE HOLE COVER LH

   Click here

9. INSTALL FRONT DOOR TRIM COVER LH

   Click here

10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

11. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Click here

12. INSTALL DOOR INSIDE HANDLE BEZEL

    Click here

13. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

14. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

15. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

16. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

17. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here