FRONT DOOR LOCK REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

5. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. REMOVE DOOR INSIDE HANDLE BEZEL

   Click here

8. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY LH

   Click here

9. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

10. REMOVE FRONT DOOR TRIM COVER LH

    Click here

11. REMOVE FRONT DOOR SERVICE HOLE COVER LH

    Click here

12. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

13. REMOVE FRONT DOOR FRAME SUB-ASSEMBLY REAR LOWER LH

    Click here

14. REMOVE FRONT DOOR OUTSIDE HANDLE COVER LH

    Click here

15. REMOVE FRONT DOOR LOWER FRAME GARNISH PAD LH

    Click here

16. REMOVE FRONT DOOR LOCK ASSEMBLY LH

    
    

    1. 

       Disconnect the 2 connectors.

    2. Using a T30 "TORX" wrench, remove 3 screws labeled A and the 2 screws labeled B.

    3. Remove the front door lock assembly LH.

       Note

       Be careful when removing the bolts as the door lock may fall and become damaged.

       Tech Tips

       Remove the door lock through the service hole.

17. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

    Click here

18. REMOVE FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH

    Click here