HEADLIGHT CLEANER ACTUATOR REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  4. REMOVE HEADLIGHT CLEANER HOSE


    1. except Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH.

        A000U75

      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

    2. for Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH and drain the washer fluid.

        A000YU6

      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

  5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. A000T9B

      Remove the screw and headlight washer actuator sub-assembly LH.

    2. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      A000TOS
    3. A000XKU

      Remove the spring nut from the headlight washer actuator sub-assembly LH.

  6. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH


    1. Remove the screw and headlight washer actuator sub-assembly RH.

    2. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration

      A000VJP
    3. A000XKU

      Remove the spring nut from the headlight washer actuator sub-assembly LH.

  7. REMOVE WASHER BRACKET

    Tech Tips


    • Use the same procedure for the RH and LH sides.

    • The procedure listed below is for the LH side.


    1. A000X1X

      except Sport Package:


      1. Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The headlight cleaner bracket is a nonreusable part.

    2. A000V5D

      for Sport Package:


      1. Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The washer bracket is a non-reusable part.