HEADLIGHT CLEANER ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL WASHER BRACKET

    Tech Tips


    • Use the same procedure for the RH and LH sides.

    • The procedure listed below is for the LH side.


    1. except Sport Package:

      Note

      Clean the bracket installation area on the bumper using non-residue solvent and apply primer.

      Tech Tips

      When installing the moulding, heat the front bumper cover and bracket using a heat light.

      Standard
      Front Bumper Cover 20 to 30°C (68 to 86°F)
      Headlight Cleaner Bracket 20 to 30°C (68 to 86°F)

      Note

      Do not heat the front bumper cover and headlight cleaner bracket excessively.


      1. Using a heat light, heat the front bumper cover and washer bracket.

      2. A000WI7

        Remove the peeling paper from a new washer bracket and install the bracket to the front bumper.

    2. for Sport Package:

      Note

      Clean the bracket installation area on the bumper using non-residue solvent and apply primer.

      Tech Tips

      When installing the moulding, heat the front bumper cover and bracket using a heat light.

      Standard
      Front Bumper Cover 20 to 30°C (68 to 86°F)
      Headlight Cleaner Bracket 20 to 30°C (68 to 86°F)

      Note

      Do not heat the front bumper cover and headlight cleaner bracket excessively.


      1. Using a heat light, heat the front bumper cover and washer bracket.

      2. A000U11

        Remove the peeling paper from a new washer bracket and install the bracket to the front bumper.

  2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. A000XIW

      Install the spring nut to the headlight actuator subassembly LH.

    2. A000URD

      Attach the 2 claws as shown in the illustration.

    3. Install the headlight washer actuator sub-assembly LH with the screw.

  3. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH


    1. A000XIW

      Install the spring nut to the headlight actuator subassembly RH.

    2. A000W9Z

      Attach the 2 claws as shown in the illustration.

    3. Install the headlight washer actuator sub-assembly LH with the screw.

  4. INSTALL HEADLIGHT CLEANER HOSE


    1. except Sport Package:


      1. Attach the 9 clamps to install the hose to the front bumper cover.

        A000VVP

      2. Connect the headlight cleaner hose to the headlight washer actuator sub-assemblies.

    2. for Sport Package:


      1. Attach the 9 clamps to install the hose to the front bumper cover.

        A000VVP

      2. Connect the headlight cleaner hose to the headlight washer actuator sub-assemblies.

  5. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  6. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  7. INSTALL FRONT BUMPER COVER

    Click here

  8. ADJUST FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here