WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A000U72E03
      *1 Ceramic Standard Line
      Standard measurement
      Area Specified Condition
      A 325 mm (12.8 in.)
      B 191.3 mm (7.53 in.)
      C 283.6 mm (11.2 in.)
      D 121.5 mm (4.78 in.)

      If the result is not as specified, replace the washer nozzle.