WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL HEADLIGHT CLEANER CONTROL RELAY


    1. A000YLE

      Attach the claw to install the headlight cleaner control relay.

  2. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. A000XHN

      Install the headlight cleaner motor and pump together with the hose.

  3. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. Attach the guide to install the windshield washer jar and pump with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      A000XM7

    2. Connect the 3 connectors and attach the 4 clamps.

  4. INSTALL HEADLIGHT ASSEMBLY LH

    Click here

  5. INSTALL WASHER INLET SUB-ASSEMBLY


    1. A000ZVO

      Install the washer inlet with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  6. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A000XDW

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

  7. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. A000Z3I

      Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  8. INSTALL FRONT FENDER LINER LH

    Click here

  9. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH

    Click here

  10. INSTALL FRONT FENDER MAIN SEAL LH

    Click here

  11. REMOVE FRONT WHEEL LH

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }

  12. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  14. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  15. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  16. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here