FRONT WIPER RUBBER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for both the RH and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL WIPER RUBBER LH


    1. A000YUU

      Install the 2 backing plates to the rubber.

      Note

      Make sure the backing plates are facing the proper direction.

    2. A000XDM

      Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

      Tech Tips

      Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.

    3. Attach the head part (large side) of the wiper rubber to the claw on the rear end the wiper blade.

      Tech Tips

      Push the wiper blade into the grooves of the wiper rubber to attach it completely.

  2. INSTALL FRONT WIPER BLADE LH


    1. A000W1P

      Install the wiper blade as shown in the illustration.