HEADLIGHT LEVELING ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    A000WEME01
    Text in Illustration
    *1 Bolt A
    *2 Bolt B

    1. Install the front height control sensor sub-assembly LH with the 3 bolts.

      Torque:
      for Bolt A
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      for Bolt B
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the connector.

  2. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    A000WKJE03
    Text in Illustration
    *1 Bolt A
    *2 Bolt B

    1. Install the rear height control sensor sub-assembly LH with the 3 bolts.

      Torque:
      for Bolt A
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      for Bolt B
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the connector.

  3. ADJUST HEADLIGHT AIMING

    Click here