RAIN SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  5. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE RAIN SENSOR COVER (w/o Driver Monitor Camera)

    Click here

  8. REMOVE RAIN SENSOR COVER (w/ Driver Monitor Camera)

    Click here

  9. REMOVE INNER REAR VIEW MIRROR ASSEMBLY


    1. w/o Automatic High Beam System, Adaptive High Beam System:

      Remove the inner rear view mirror assembly Click here.

    2. w/ Automatic High Beam System, Adaptive High Beam System:

      Remove the inner rear view mirror assembly Click here.

  10. REMOVE RAIN SENSOR


    1. Pull the stopper in the direction shown in the illustration, and release the lock.

    2. Disconnect the connector, and remove the rain sensor.

      A000TD1E02
      *1 w/o Driver Monitor Camera:
      *2 w/ Driver Monitor Camera (for LHD):
      *3 w/ Driver Monitor Camera (for RHD):