RAIN SENSOR INSTALLATION

PROCEDURE


  1. INSTALL RAIN SENSOR TAPE


    1. A000YGIE04

      If reusing the rain sensor:

      Install new rain sensor tape.


      1. Remove the used rain sensor tape from the windshield glass or rain sensor.

      2. Apply new rain sensor tape on the rain sensor lens surface in the area indicated by the hatched area.

        Note


        • Keep the tape's exposed adhesive free from dust and fingerprints.

        • Apply the tape exactly according to the specifications below.

          Specification
          Area Measurement
          A 15.0 mm (0.591 in.)
          B 8.0 mm (0.315 in.)

  2. INSTALL RAIN SENSOR

    Note


    • Make sure the adhesive between the bracket and windshield glass is normal.

    • If there is any residue left from the rain sensor tape on the windshield, remove it.

    • Clean the glass surface with cloth or similar material.

    • Make sure there are no air bubbles between the rain sensor and windshield.


    1. Peel the peeling paper from the rain sensor tape.

    2. Securely attach the rain sensor to the bracket.

    3. Push in the stopper.

    4. Connect the connector.

      A000YXFE02
      *1 w/o Driver Monitor Camera:
      *2 w/ Driver Monitor Camera (for LHD):
      *3 w/ Driver Monitor Camera (for RHD):

  3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY


    1. w/o Automatic High Beam System, Adaptive High Beam System:

      Install the inner rear view mirror assembly Click here.

    2. w/ Automatic High Beam System, Adaptive High Beam System:

      Install the inner rear view mirror assembly Click here.

  4. INSTALL RAIN SENSOR COVER (w/o Driver Monitor Camera)

    Click here

  5. INSTALL RAIN SENSOR COVER (w/ Driver Monitor Camera)

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  11. ADJUST ADAPTIVE HIGH BEAM CAMERA BEAM AXIS (w/ Adaptive High Beam System)

    Click here