STOP LIGHT SWITCH ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY

    A000ZDDE03
    Text in Illustration
    *a

    Component without harness connected

    (Stop Light Switch Assembly)

    1. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      A5-2 (L) - Body ground Brake pedal released Below 1 V
      Brake pedal pushed 11 to 14 V

      If the result is not as specified, replace the stop light switch assembly.