HAZARD WARNING SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE NO. 3 BOX PANEL

    Click here

  6. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (HAZARD WARNING SWITCH)

    A000VZK

    1. Remove the 2 bolts.

    2. Detach the 6 clips.

    3. Disconnect the connectors and remove the multi-media module receiver assembly (hazard warning switch).

  11. REMOVE NO. 2 RADIO BRACKET

    A000XO8

    1. Remove the 3 bolts and No. 2 radio bracket.

  12. REMOVE NO. 1 RADIO BRACKET

    A000VPE

    1. Remove the 3 bolts and No. 1 radio bracket.