VANITY LIGHT(for Front) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY

    A000TAKE01

    1. Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      *1 Protective Tape
    2. A000VBY

      Detach the 2 claws to remove the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the vanity light bulb holder.

  3. REMOVE VISOR BRACKET COVER

    A000WIJ

    1. Using a moulding remover, detach the 4 claws to remove the visor bracket cover.

  4. REMOVE VISOR ASSEMBLY LH

    A000VNV

    1. Remove the 2 screws and visor assembly LH.