REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Connect the connector to install the rear combination light socket and wire sub-assembly to the rear combination light lens.

  2. INSTALL REAR COMBINATION LIGHT PACKING LH


    1. Install a new rear combination light packing LH to the rear combination light lens.

  3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the clip, 2 claws and 2 guides to install the rear combination light assembly LH.

    2. Install the 3 nuts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    3. Connect the connector.

      A000ZXSE01
      Text in Illustration
      *1 Rear Combination Light Assembly LH *2 Clip

  4. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    A000UN8E01
    Text in Illustration
    *1 Fastener
    *2 Guide

    1. Attach the 2 guides and 2 fasteners to install the luggage trim service hole cover.

  5. INSTALL REAR LIGHT SOCKET AND WIRE LH


    1. w/o Rear Fog Light:


      1. Connect the connector and attach the guide to install the rear light socket and wire LH to the rear light lens.

    2. w/ Rear Fog Light:


      1. Connect the connector and attach the guide to install the rear light socket and wire LH to the rear light lens.

  6. INSTALL REAR NO. 1 FOG LIGHT BULB (w/ Rear Fog Light)

    A000X5L

    1. Install the rear No. 1 fog light bulb to the rear light socket and wire LH.

    2. A000YQN

      Turn the rear light socket and wire LH with the rear No. 1 fog light bulb in the direction indicated by the arrow to connect them as a unit.

  7. INSTALL REAR LIGHT GASKET LH


    1. w/o Rear Fog Light:


      1. Install a new rear light gasket LH to the rear light lens.

    2. w/ Rear Fog Light:


      1. Install a new rear light gasket LH to the rear light lens.

  8. INSTALL REAR LIGHT ASSEMBLY LH


    1. w/o Rear Fog Light:


      1. Install the rear light assembly LH with the 2 nuts and 2 cap nuts.

        Torque:
        4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Connect the connector.

        A000VDBE01
        Text in Illustration
        *1 Nut *2 Cap Nut

    2. w/ Rear Fog Light:


      1. Install the rear light assembly LH with the 2 nuts and 2 cap nuts.

        Torque:
        4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Connect the connector.

        A000WF4E01
        Text in Illustration
        *1 Nut *2 Cap Nut

  9. INSTALL BACK DOOR TRIM COVER

    Click here

  10. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

  11. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

    Click here

  12. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  13. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  14. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY

    Click here

  15. INSTALL SWITCH BEZEL

    Click here

  16. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here