REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

   

   Text in Illustration

   *1	Fastener
   *2	Guide

   
   

   1. Detach the 2 fasteners and guides and remove the luggage trim service hole cover.

2. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

   
   

   1. Put protective tape around the rear combination light assembly LH.

   2. Disconnect the connector.

   3. Remove the 3 nuts.

   4. Move the rear combination light assembly LH in the direction of the arrow in the illustration, detach the clip, 2 claws and 2 guides to remove the rear combination light assembly LH.

      Tech Tips

      The clips remain on the vehicle body.

      

      Text in Illustration

      *1	Protective Tape	*2	Rear Combination Light Assembly LH
      *3	Clip	-	-

3. REMOVE REAR COMBINATION LIGHT PACKING LH

   

   
   

   1. Remove the rear combination light packing LH from the rear combination light lens.

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

   

   
   

   1. Disconnect the connector and remove the rear combination light socket and wire sub-assembly LH from the rear combination light lens.

5. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

   Click here

6. REMOVE SWITCH BEZEL

   Click here

7. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

   Click here

8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

   Click here

9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Click here

10. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

11. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Click here

12. REMOVE BACK DOOR TRIM COVER

    Click here

13. REMOVE REAR LIGHT ASSEMBLY LH

    
    

    1. w/o Rear Fog Light:

       
       

       1. Put protective tape around the rear light assembly LH.

       2. Disconnect the connector.

       3. Remove the 2 nuts and 2 cap nuts and remove the rear light assembly LH.

          

          Text in Illustration

          *1	Protective Tape	*2	Nut
          *3	Cap Nut	-	-

    2. w/ Rear Fog Light:

       
       

       1. Put protective tape around the rear light assembly LH.

       2. Disconnect the connector.

       3. Remove the 2 nuts and 2 cap nuts and remove the rear light assembly LH.

          

          Text in Illustration

          *1	Protective Tape	*2	Nut
          *3	Cap Nut	-	-

14. REMOVE REAR LIGHT GASKET LH

    

    
    

    1. w/o Rear Fog Light:

       
       

       1. Remove the rear light gasket from the rear light lens.

    2. 

       w/ Rear Fog Light:

       
       

       1. Remove the rear light gasket from the rear light lens.

15. REMOVE REAR NO. 1 FOG LIGHT BULB (w/ Rear Fog Light)

    

    
    

    1. Turn the rear light socket and wire LH with the rear No. 1 fog light bulb in the direction indicated by the arrow and disconnect them as a unit.

    2. 

       Remove the rear No. 1 fog light bulb from the rear combination rear light socket and wire LH.

16. REMOVE REAR LIGHT SOCKET AND WIRE LH

    

    
    

    1. w/o Rear Fog Light:

       
       

       1. Disconnect the connector, detach the guide and remove the rear light socket and wire from the rear light lens.

    2. 

       w/ Rear Fog Light:

       
       

       1. Disconnect the connector, detach the guide and remove the rear light socket and wire from the rear light lens.