SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

   

   Text in Illustration

   *a	Component without harness connected (Side Turn Signal Light Assembly LH)

   
   

   1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition Battery positive (+) → Terminal 2 (+B) Battery negative (-) → Terminal 1 (GND) Illuminates

      If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

   

   Text in Illustration

   *a	Component without harness connected (Side Turn Signal Light Assembly RH)

   
   

   1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition Battery positive (+) → Terminal 2 (+B) Battery negative (-) → Terminal 1 (GND) Illuminates

      If the result is not as specified, replace the side turn signal light assembly RH.