HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Attach the clip to install the headlight assembly LH.

    3. Install the 3 bolts.

      Torque:
      8.1 N*m  { 83 kgf*cm, 72 in.*lbf }

    4. Connect the connector.

      A000ZJQE01
      Text in Illustration
      *1 Protective Tape *2 -

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  8. ADJUST HEADLIGHT AIMING

    Click here

  9. ADJUST FOG LIGHT AIMING


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here