INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING RADAR SENSOR

   
   

   1. Install the theft warning radar sensor with the 4 screws.

   2. Connect the connector.

   3. Attach the 4 clamps.

   4. Install the 2 screws.

2. INSTALL MAP LIGHT ASSEMBLY

   
   

   1. for Standard Body:

      Click here

   2. for Long Body:

      Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here