SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT INDICATOR LIGHT ASSEMBLY

    A000Z9PE12
    Text in Illustration
    *1 for LH
    *2 for RH
    *a

    Component without harness connected

    (Indicator Light Assembly)

    1. Check operation of the indicator light.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (LP1*1, LP2*2)

      Auxiliary battery positive (-) → Terminal 1 (E1*1, E2*2)

      		 Illuminates

      Note


      • If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator will not turn on.

      • A voltage of more than 12 V will damage the security indicator.

      • If the voltage is too low, the security indicator will not turn on.

      If the result is not as specified, replace the indicator light.