PROCEDURE
RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
for HFO-1234yf (R1234yf):
REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)
REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)
REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)
REMOVE BATTERY SERVICE HOLE COVER LH
PRECAUTION
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR SEAT ASSEMBLY
for Power Seat: Click here
for Ottoman: Click here
REMOVE REAR DOOR SCUFF PLATE LH
REMOVE REAR DOOR SCUFF PLATE RH
REMOVE REAR SEAT SIDE GARNISH LH
REMOVE REAR SEAT SIDE GARNISH RH
REMOVE INNER ROOF SIDE GARNISH LH
REMOVE INNER ROOF SIDE GARNISH RH
REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
REMOVE NO. 1 COOLER COVER
Detach the 5 clips and remove the No. 1 cooler cover.
REMOVE ROPE HOOK
REMOVE ROPE HOOK ASSEMBLY
REMOVE DECK TRIM SIDE BOARD RH
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
REMOVE REAR FLOOR FINISH PLATE
REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
REMOVE NO. 2 ROOF SIDE AIR DUCT LH
Remove the clip.
Detach the 2 claws and remove the No. 2 roof side air duct LH.
REMOVE NO. 2 ROOF SIDE AIR DUCT RH
Remove the clip.
Detach the 2 claws and remove the No. 2 roof side air duct RH.
REMOVE REAR NO. 4 AIR DUCT
Detach the 4 claws and remove the rear No. 4 air duct.
REMOVE REAR NO. 5 AIR DUCT
Detach the 6 claws and remove the rear No. 5 air duct.
REMOVE NO. 1 COOLER AIR DUCT
Detach the 2 claws and remove the No. 1 cooler air duct.
REMOVE NO. 2 COOLER AIR DUCT
Detach the 2 claws and remove the No. 2 cooler air duct.
DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Remove the No. 4 cooling unit packing.
Remove the 2 bolts and disconnect the air conditioning tube and accessory assembly.
Remove the 2 O-rings from the air conditioning tube and accessory assembly.
REMOVE REAR COOLING UNIT ASSEMBLY
Disconnect the connectors and detach the clamps.
Remove the 2 bolts and 2 nuts.
Disconnect the drain cooler hose and remove the rear cooling unit assembly.