AIR CONDITIONING AMPLIFIER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY


    1. A000TFCE01
      Text in Illustration
      *1 Protrusion Part
      *2 Fitting Point

      Insert the protrusion part of the air conditioning amplifier assembly to the fitting point of the air conditioning unit, and then align the hole of the air conditioning unit assembly with the locating pin of the air conditioning unit and install the screw.

    2. Connect the 3 connectors.

  2. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

    Click here

  11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

  12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  13. CHECK SRS WARNING LIGHT

    Click here