AIR CONDITIONING AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

   Click here

2. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

   Click here

3. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)

   Click here

4. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

5. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

9. REMOVE LOWER INSTRUMENT PANEL

   Click here

10. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

12. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

13. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

    
    

    1. 

       Disconnect the 3 connectors.

    2. Remove the screw and air conditioning amplifier assembly.