FRONT EVAPORATOR TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 1 COOLER THERMISTOR

   

   Note

   If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted. Insert the sensor within range C shown in the illustration.

   
   

   1. Install the No. 1 cooler thermistor as shown in the illustration.

      Area	Standard Dimension
      a	20 to 30 mm (0.788 to 1.18 in.)
      b	154.1 mm (6.07 in.)
      c	33.3 mm (1.31 in.)
      d	45 to 55 mm (1.78 to 2.16in.)

   2. 

      Attach the clamp.

2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

   Click here

3. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

   Click here

4. INSTALL AIR CONDITIONER HARNESS

5. INSTALL QUICK HEATER ASSEMBLY

   Click here

6. INSTALL AIR OUTLET SERVO MOTOR LH (Foot/Def)

   Click here

7. INSTALL AIR OUTLET SERVO MOTOR RH (Foot/Def)

   Click here

8. INSTALL MAX HOT BYPASS SERVO MOTOR (Hot)

   Click here

9. INSTALL AIR MIX SERVO MOTOR LH (Hot)

   Click here

10. INSTALL AIR MIX SERVO MOTOR RH (Hot)

    Click here

11. INSTALL AIR MIX SERVO MOTOR LH (Front A/C Rear Air Flow)

    Click here

12. INSTALL AIR MIX SERVO MOTOR RH (Front A/C Rear Air Flow)

    Click here

13. INSTALL AIR OUTLET SERVO MOTOR LH (Front A/C Rear Air Flow)

    Click here

14. INSTALL AIR OUTLET SERVO MOTOR RH (Front A/C Rear Air Flow)

    Click here

15. INSTALL AIR OUTLET SERVO MOTOR LH (Face)

    Click here

16. INSTALL AIR OUTLET SERVO MOTOR RH (Face)

    Click here

17. INSTALL AIR MIX SERVO MOTOR LH (Cool)

    Click here

18. INSTALL AIR MIX SERVO MOTOR RH (Cool)

    Click here

19. INSTALL COOL AIR BYPASS SERVO MOTOR LH

    Click here

20. INSTALL COOL AIR BYPASS SERVO MOTOR RH

    Click here

21. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

    Click here

22. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

23. INSTALL BLOWER ASSEMBLY

    Click here

24. INSTALL FRONT AIR CONDITIONING UNIT

    Click here