ROOM TEMPERATURE SENSOR(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR


    1. A000XTZE01
      Text in Illustration
      *1 Paint Mark

      Attach the 2 claws to install the cooler (room temperature sensor) thermistor.

    2. Connect the connector and duct.

      Tech Tips

      The direction of the paint mark of the duct is indicated in the illustration.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT PANEL ORNAMENT

    Click here

  4. INSTALL INSTRUMENT SIDE PANEL LH

    Click here