CONDENSER INSTALLATION

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. Using pliers, install the cooler dryer.

   2. Apply a sufficient amount of compressor oil to the contact surfaces of a new O-ring and the cap.

      Compressor oil
      ND-OIL 11 or equivalent

   3. Install the O-ring to the cap.

   4. Using a 14 mm socket hexagon wrench, install the cap to the modulator.

      Torque:

      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

2. INSTALL RADIATOR ASSEMBLY (HYBRID SYSTEM)

   
   

   1. Install the radiator assembly to the cooler condenser assembly with the 4 bolts.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

3. INSTALL COOLER CONDENSER ASSEMBLY

   
   

   1. Install the cooler condenser assembly to the radiator assembly with the 4 bolts.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

4. INSTALL RADIATOR ASSEMBLY WITH COOLER CONDENSER ASSEMBLY

   Click here