CHILD RESTRAINT SEAT TETHER ANCHOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

    A000VP7

    1. for 4-Passenger with Ottoman:

      Install the 2 child restraint seat tether anchor brackets with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

    2. for 4-Passenger with Ottoman:

      Install the 3 child restraint seat tether anchor brackets with the 3 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  3. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    A000ZO3

    1. Attach the 2 clips and 2 claws, and install the child restraint seat tether anchor cover.

  4. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

  5. INSTALL INNER ROOF SIDE GARNISH RH

    Click here

  6. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  7. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

  8. INSTALL REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  9. INSTALL REAR DOOR SCUFF PLATE RH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  10. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman:

      Click here

    3. for Fixed Type Seat:

      Click here