REAR SEAT INNER BELT ASSEMBLY(for Power Seat) INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER

    A000WUAE01
    *1 Protruding Part

    1. Install the rear seat inner belt assembly center with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

  2. INSTALL REAR SEAT INNER BELT ASSEMBLY LH


    1. A000V0P

      w/o Illumination:

      Install the rear seat inner belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. w/ Illumination:


      1. A000WZ9

        Install the rear seat inner belt assembly LH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      2. Attach the clamp.

      3. A000V9N

        Attach the 2 clamps and connect the connector.

  3. INSTALL REAR SEAT INNER BELT ASSEMBLY RH


    1. Use the same procedures described for the LH side.

  4. INSTALL REAR SEAT ASSEMBLY

    Click here