ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for 4-Passenger with Ottoman)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Install the bracket with the 4 screws.

    4. Return the No. 3 room partition pad to its original position.

    5. Attach the clip.

  2. INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY (for 4-Passenger with Ottoman)

    Click here

  3. INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH (for 4-Passenger with Ottoman)

    Click here

  4. INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH (for 4-Passenger with Ottoman)

    Click here

  5. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for Power Seat, for 5-Passenger with Ottoman)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Return the No. 3 room partition pad to its original position.

    4. Attach the clip.

  6. INSTALL REAR CENTER SEAT CUSHION ASSEMBLY (for Power Seat, for 5-Passenger with Ottoman)

    Click here

  7. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for Fixed Seat Type)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Return the No. 3 room partition pad to its original position.

    4. Attach the clip.

  8. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

    Click here