LOW PITCHED HORN INSPECTION

PROCEDURE


  1. INSPECT LOW PITCHED HORN


    1. A000WA4E12

      for Type A:

      Apply battery voltage and check operation of the horn, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the horn.

    2. A000TE6E03

      for Type B:

      Apply battery voltage and check operation of the horn, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the horn.