ТЕРМОСТАТ СНЯТИЕ

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE ENGINE ROOM SIDE COVER RH

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  6. DRAIN ENGINE COOLANT

    Click here

  7. REMOVE RADIATOR RESERVOIR ASSEMBLY


    1. A001CN3

      Disconnect the 2 reservoir hoses.

    2. Remove the 2 bolts and radiator reservoir assembly.

  8. DISCONNECT NO. 2 RADIATOR HOSE


    1. Disconnect the No. 2 radiator hose from the water inlet sub-assembly.

  9. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


    1. A0019X1

      Remove the 3 nuts, the water inlet with thermostat and the gasket.