КЛАПАН ПРОДУВКИ АДСОРБЕРА УСТАНОВКА

PROCEDURE

1. INSTALL PURGE VSV

   
   

   1. 

      Install the purge VSV with the bolt.

      Torque:

      21 N*m  { 215 kgf*cm, 15 ft.*lbf }

   2. Connect the 2 purge line hoses to the purge VSV.

   3. Connect the purge VSV connector.

2. CONNECT ENGINE WIRE

   Click here

3. INSTALL AIR CLEANER CAP LH

   Click here

4. INSTALL AIR CLEANER CAP RH

   Click here

5. INSTALL INTAKE AIR CONNECTOR PIPE

   Click here

6. INSTALL NO. 1 AIR CLEANER INLET

   Click here

7. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

8. INSTALL ENGINE ROOM SIDE COVER LH

   Click here

9. INSTALL ENGINE ROOM SIDE COVER RH

   Click here

10. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here