КЛАПАН ПРОДУВКИ АДСОРБЕРА СНЯТИЕ

PROCEDURE

1. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

   Click here

2. REMOVE ENGINE ROOM SIDE COVER LH

   Click here

3. REMOVE ENGINE ROOM SIDE COVER RH

   Click here

4. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

5. REMOVE NO. 1 AIR CLEANER INLET

   Click here

6. REMOVE INTAKE AIR CONNECTOR PIPE

   Click here

7. REMOVE AIR CLEANER CAP LH

   Click here

8. REMOVE AIR CLEANER CAP RH

   Click here

9. DISCONNECT ENGINE WIRE

   Click here

10. REMOVE PURGE VSV

    

    
    

    1. Disconnect the purge VSV connector.

    2. Disconnect the 2 purge line hoses from the purge VSV.

    3. Remove the bolt and purge VSV.