ТОПЛИВНЫЙ НАСОС РАЗБОРКА

PROCEDURE


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

    Click here

  3. REMOVE FUEL FILTER

    Click here

  4. REMOVE JET PUMP

    Click here

  5. REMOVE FUEL PUMP ASSEMBLY

    A001AYS

    1. Disconnect the fuel pump connector from the fuel pump.

    2. A001A3WE02
      *1 O-Ring

      Disengage the 5 claws on the filter and remove the fuel pump from the fuel pump.

    3. Remove the fuel main valve from the fuel filter.

    4. Remove the 2 O-rings from the fuel main valve.

    5. Remove the O-ring from the fuel filter.

    6. Detach the 2 claws of the fuel filter and remove the cap.

    7. Remove the fuel pressure regulator from the fuel filter.

    8. Remove the 2 O-rings from the pressure regulator.

  6. REMOVE BRACKET

    Click here