ТОПЛИВНАЯ ФОРСУНКА УСТАНОВКА

PROCEDURE


  1. INSTALL FUEL INJECTOR ASSEMBLY


    1. A001CTGE01
      *1 O-Ring

      Apply gasoline to a new O-ring and install it to the injector.

      Note

      Check that there is no damage or foreign material in the groove of the injector when installing the injector's O-ring.

    2. A001CFU

      Connect the connector to the injector.

    3. A001A40E01
      *1 CORRECT
      *2 INCORRECT

      Install the injector to the delivery pipe as shown in the illustration.

      Note


      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the injector, be careful not to damage the O-ring.

      • Attach the part of the injector labeled B between the parts of the delivery pipe labeled A.

  2. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

    A001G0EE03
    *1 for Bank 1:
    *2 for Bank 2:

    1. Connect the 4 wire harness clamps.

    2. Install the 4 delivery pipe spacers and 8 insulators to the intake manifold.

    3. Install the 2 delivery pipes (with injector) to the intake manifold.

    4. A001F3S

      Install the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Check that the part of the injector labeled B is between the parts of the delivery pipe labeled A.

      A001A40E01
      *1 CORRECT
      *2 INCORRECT
    5. A001A4XE11
      *1 for Bank 1:
      *2 for Bank 2:

      Connect the 2 connectors.

  3. CONNECT FUEL TUBE SUB-ASSEMBLY


    1. Push in the tube connector to the pipe until the tube connector makes a "click" sound.

      A001C3VE01

    2. Push down on the retainer to lock it in place.

      Note


      • Check that there is no damage or foreign objects on the connected part of the fuel pipe.

      • After connecting, check that the fuel tube connector and the pipe are securely connected by pulling on them.

  4. CONNECT NO. 3 FUEL HOSE


    1. A001AQHE02

      Push in the tube connector to the pipe until the tube connector makes a "click" sound.

    2. Install the fuel pipe clamp.

      Note


      • Check that there is no damage or foreign objects on the connected part of the fuel pipe.

      • After connecting, check that the fuel tube connector and the pipe are securely connected by pulling on them.

  5. INSTALL INTAKE MANIFOLD

    Click here

  6. CHECK FOR FUEL LEAKS

    Click here