ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE INTAKE AIR CONNECTOR PIPE

    Click here

  5. REMOVE V-RIBBED BELT


    1. A001A0E

      Rotate the tensioner pulley counterclockwise to loosen the belt tension.

      Tech Tips

      The pulley bolt for the belt tensioner has a left-handed thread.


      1. A001AYXE01
        *1 Hole

        While turning the belt tensioner counterclockwise, align the holes. Insert a bar with a diameter of 5 mm (0.197 in.) into the holes to fix the belt tensioner in place.

    2. Remove the V belt.