ПЕДАЛЬ АКСЕЛЕРАТОРА СНЯТИЕ

PROCEDURE


  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    A001AK3

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

    If applied, the accelerator pedal sensor assembly must be replaced.


    1. Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 3 nuts and accelerator pedal sensor assembly.

      Note


      • Avoid physical shocks to the accelerator pedal sensor assembly.

      • Do not disassemble the accelerator pedal sensor assembly.

  2. REMOVE ACCELERATOR PEDAL


    1. A0019M5

      Detach the 2 claws and remove the accelerator pedal pad.

    2. A001DBN

      Remove the 2 bolts and accelerator pedal.