ЭЛЕКТРОДВИГАТЕЛЬ МЕХАНИЗМА ИЗМЕНЕНИЯ ФАЗ ГАЗОРАСПРЕДЕЛЕНИЯ СНЯТИЕ

PROCEDURE

1. REMOVE INTAKE AIR CONNECTOR PIPE

   Click here

2. REMOVE CAMSHAFT TIMING CONTROL MOTOR RH

   

   
   

   1. Disconnect the 2 camshaft timing control motor RH connectors.

   2. Remove the bolt and engine wire bracket.

   3. 

      Remove the 3 bolts and camshaft timing control motor RH.

   4. Remove the O-ring from the timing chain cover.

3. REMOVE CAMSHAFT TIMING CONTROL MOTOR LH

   

   
   

   1. Disconnect the 2 camshaft timing control motor LH connectors and engine wire clamp.

   2. 

      Remove the 3 bolts and camshaft timing control motor LH.

   3. Remove the O-ring from the timing chain cover.