СИСТЕМА SFI ОСНОВНАЯ ПРОВЕРКА

DTC Code DTC Name
BASIC INSPECTION

CAUTION / NOTICE / HINT

When the malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when engine troubleshooting.

PROCEDURE


  1. CHECK BATTERY VOLTAGE

    Note

    Carry out this check with the engine stopped and engine switch OFF.

    Result
    Result Proceed to
    11 V or higher OK
    Below 11 V NG

    NG

    CHARGE OR REPLACE BATTERY

    OK

  2. CHECK WHETHER ENGINE WILL CRANK

    Result
    Proceed to
    OK
    NG

    NG

    PROCEED TO PROBLEM SYMPTOMS TABLE

    OK

  3. CHECK WHETHER ENGINE STARTS

    Result
    Proceed to
    OK
    NG

    NG

    GO TO STEP 6 Click here

    OK

  4. CHECK AIR FILTER


    1. Visually check that the air filter is not excessively contaminated with dirt or oil.

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE AIR FILTER

    OK

  5. CHECK IDLING SPEED

    Result
    Proceed to
    OK
    NG

    NG

    TROUBLESHOOT IDLING SPEED AND PROCEED TO NEXT STEP

    OK

  6. CHECK FUEL PRESSURE

    Result
    Proceed to
    OK
    NG

    NG

    TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP

    OK

  7. CHECK FOR SPARKS

    Result
    Proceed to
    OK
    NG

    OK

    PROCEED TO PROBLEM SYMPTOMS TABLE

    NG

    TROUBLESHOOT SPARK AND PROCEED TO NEXT STEP