GRAPHIC DECAL(for 3 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • When removing the stripe tape, heat the vehicle body and stripe tape using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Stripe Tape 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or stripe tape excessively.

PROCEDURE


  1. REMOVE FENDER STRIPE LH

    B001GWL

    1. Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.

  2. REMOVE FRONT SIDE PANEL STRIPE LH

    B001GAT

    1. Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.

  3. REMOVE QUARTER STRIPE REAR UPPER LH

    B001CSQ

    1. Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.

  4. REMOVE QUARTER STRIPE LH

    B001GBX

    1. Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.