BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier) DISASSEMBLY

PROCEDURE


  1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)


    1. Disconnect the connector and remove the license plate light cord.

  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  3. REMOVE NO. 1 BACK DOOR GARNISH RETAINER

    B001I33

    1. Remove the 2 screws.

    2. Detach the 2 guides and remove the No. 1 back door garnish retainer.

  4. REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

    Click here

  5. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

    B001CEQC01
    *1 Back Door Outside Garnish Protector

    1. Remove the back door outside garnish protector.

  6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

    B001HPPC01
    *1 Back Door Outside Garnish Protector

    1. Remove the back door outside garnish protector.