BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier) DISASSEMBLY

PROCEDURE


  1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)


    1. Disconnect the connector and remove the license plate light cord.

  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  3. REMOVE NO. 1 BACK DOOR GARNISH RETAINER

    A01XDIJ

    1. Remove the 3 screws and No. 1 back door garnish retainer.

  4. REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

    Click here

  5. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

    A01XLFME03
    Text in Illustration
    *1 Back Door Outside Garnish Protector

    1. Remove the back door outside garnish protector.

  6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

    A01XHKEE03
    Text in Illustration
    *1 Back Door Outside Garnish Protector

    1. Remove the back door outside garnish protector.