BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier) REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM COVER

    Click here

  5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE TOOL CASE

    Click here

  7. REMOVE BACK DOOR LOCK COVER

    Click here

  8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  9. REMOVE BACK DOOR SERVICE HOLE COVER

    Click here

  10. REMOVE BACK DOOR OUTSIDE HANDLE LH

    Click here

  11. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    A01XHIT

    1. Remove the nut.

    2. Disconnect the connector.

    3. Detach the clamp and disconnect the back door electrical key switch wire harness from the back door panel.

    4. A01XLLRE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish sub-assembly.

    5. Using moulding remover B, detach the 19 clips and remove the back door garnish sub-assembly.

  12. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH


    1. A01XFJJ

      Detach the 3 claws and 2 guides and remove the No. 2 back door outside garnish.